CEELITE- Flat Flexible Light Panels
  • ABOUT
  • gallery
  • TECHNICAL INFORMATION
  • download

ABOUT CONTENT:

CeeLite 1mm Thin Light Panels are flat and flexible light panels used for backlighting. These flexible light panels come in standard stock sizes and can also be made in custom sizes. The CeeLite LEC Flexible Light Panel is a capacitor structure with phosphor sandwiched between the electrodes. Application of an AC voltage generates a changing field within the phosphor, which causes the phosphor to emit light.  CeeLite LEC Flexible Light Panels are constructed using screen printable polymer thick film compositions.The flexible light panels are powered by inverters, which convert the electrical current, either DC or AC, to the required voltage and frequency to power the panel. Different size panels require differing voltages and frequencies - larger panel area requires more voltage and higher frequency. These extremely thin panels typically consume very small quantities of electricity relative to other technologies, particularly incandescent, neon and fluorescent. Contact us today regarding our thin and flexible light panels!

Advantages

  • Flexible and bendable

  • Low power consumption

  • Easy installation

  • Extremely durable/Impact      resistant

  • Thin

  • Brightness control

  • No heat generation

  • Ability to illuminate complex      shapes

  • Available in shapes

  • Flexible power options i.e.      Battery powered options (AA, AAA, 9V)

  • Programmable light for flashing      effect

  • Significantly reduces      installation cost compared to other lighting installations

  • Can be incorporated into clothing

 

Less than 1mm thin

FLEXIBILITY
Can be folded or bent to emit light in different directions

UNIFORMITY
Flawless surface illumination without the use of complicated light guiding optics

POWER
Only 0.05mA/cm^2 power density at 100V 400Hz
No heat generation

COOL TO THE TOUCH
No heat generated


TECHNICAL INFORMATION:

 

 

General Handling

  CEELITE PANELS MAINLY USED FOR CONSERVATION. ‘MAY’ be used for advertising but will not be as bright as LED panels and they are for slight ambiance lighting only. Do not fold or crimp panels, bend around sharp objects, or roll-up tightly.   Do not fold or crimp the pigtail lead.   Do not alter the position of the pigtail lead after installation.  Repetitive folding back and forth of the pigtail will cause damage.    Never cut the panels yourself.    Order custom sizes and shapes from the factory.  Do not use indoor panels in outdoor applications or in direct sunlight or moisture.      Indoor panels require additional protection, such as films, laminates or inks, to prevent moisture and UV damage.    Use a clear protective layer such as Lexan, Plexiglas, or just glass on top of the panel.

 

SPECIFICATION

Material

Phosphor   / Laminate / and More

Surface Finish

Laminate  

Thinckness                        1mm thin

Size(s)  

SEE   SPECIFICATION LINK

Edge Style

½”   Border of NO LIGHT

Usage

Museam   Conservation – Advertising (HOWEVER VERY DULL ILLUMINATION / AMBIANCE ONLY)




PRODUCT VIDEO
COMPATIBLE ACCESSORIES